Labor protection products must be worn before work. Female workers must wear work caps or hair nets. Scarves are not allowed, and high heels are not allowed. Do not wear gloves during operation, do not smoke, do not chat with others, and concentrate your energy. It is strictly forbidden to play and play in the workshop.
2. Before starting the machine tool, it is necessary to check whether the lubrication and protective devices of all parts of the machine tool meet the requirements.
3. Reasonable selection of tools and fixtures. When clamping precision workpieces or thin and soft workpieces, the clamping method should be appropriate, and the force should be appropriate to ensure that the clamping is firm and reliable.
4. During the operation, it is necessary to observe whether the workpiece clamping is loose at any time. If it is loose, stop immediately to prevent injury. When observing the workpiece during operation, the station should be appropriate.
5. When the engraving machine moves quickly, pay attention to the surrounding conditions to prevent collision.
6. If the motor of the CNC engraving machine is abnormally hot and the sound is abnormal, the engraving machine should be stopped immediately
7. The operation should be civilized. Do not arbitrarily prevent tools, measuring tools, and workpieces on the machine tool guide rails and workbenches. When the CNC engraving machine is running, it is forbidden to touch the rotating parts, and do not lean your body on the machine tool. Do not pass items over the moving parts of the machine.
8. Comply with the process regulations, do not arbitrarily modify the set parameters and operating procedures of the manufacturer in the CNC system.
9. After the operation is completed, clean the machine tool, clean up the work area, and disconnect the power supply.
