Knowledge

​Adopt imported square linear guide, double row and four rows of sliders, strong bearing capacity, fast speed, stable operation, high precision and long service life. Constant powe

​Stone carving, stone carving art originated earlier in my country, and it also reflects the needs of the people. When the stone engraving machine appeared, it can be said that it

Why is the limit switch good and bad when starting the reset: The ejector rod cannot reach the limit switch, just correct it. The contact of the drive line is not good, try to fix

The installation of the metal engraving machine is stable and does not shake. The parts of the metal engraving machine are complete without scratches, the mechanical parts are comp

The main shaft of the metal engraving machine runs slowly: it feels that the motor has no power to rotate, does not rotate or rotates slowly. Check the circuit, check the motor wir

Check the engraving machine sensor for dust, poor contact or damage. Wipe the dust off the sensor, if it still doesn't work, just replace the sensor.

CNC woodworking engraving machine is specially designed for the engraving, hollowing out, engraving and milling of wooden doors, cabinet doors, solid wood doors, embossed doors and

The quality and temperature of the circulating water directly affect the service life of the laser tube. It is recommended to use pure water and control the water temperature below

It is strictly forbidden to start the laser power supply and Q-switched power supply under the condition of no water or abnormal water circulation.

​The appearance of the aluminum plate engraving machine is undoubtedly a great improvement and milestone in its industry. In the past, it was impossible for most people to engrave

The laser is processed by a non-mechanical "tool", which does not produce mechanical extrusion or mechanical stress on the material, no "tool" wear, non-toxic, and rarely causes en

The engraving machine should process materials according to the design purpose of the machine. Processing unsuitable materials for a long time will easily cause the accuracy of the